Angle / Channel / Flat Bar
Structural sections in stainless and mild steel to IS 2062 — angles, channels, beams, flats, square bars and TMT bars, from prime and secondary mills.
Product Overview
We offer a wide variety of structural steel for maintenance, construction and new projects. Material comes from major primary manufacturers such as SAIL, Vizag, Jindal and TISCO, as well as from secondary rolling and re-rolling mills where a project calls for it.
The range covers SS and MS angles, channels, beams, flats, square bars, round bars and TMT re-bars. TMT bars are offered in FE 415 and FE 500 grades with manufacturing test certificates.
- Angles: 25×25×3 to 200×200×20 mm
- Channels: 75×40 to 400×100 mm
- Beams: 100×50 to 600×210 mm
- Flats: 21×6 mm to 300×16 mm
- Square bars: 10×10 mm to 63×63 mm
Specifications
| Parameter | Details |
|---|---|
| Angles | Grade IS 2062 — 25×25×3/5 up to 200×200×16/20 mm |
| Channels | Grade IS 2062 — 75×40 up to 400×100 mm |
| Beams | Light, medium and standard — IS 2062, 100×50 up to 600×210 mm |
| Flats | 21×6 mm to 300×16 mm |
| Square bars | 10×10 mm to 63×63 mm |
| Round bars / wire rods | Low carbon 5WR-14 / IS 2062 Gr. A, 5 mm to 250 mm dia. |
| TMT bars | FE 415 / FE 500 with manufacturing test certificate |
| Sources | SAIL, Vizag, Jindal, TISCO and secondary re-rolling mills |
Grades & Standards
SS / MS Angles
IS 2062
SS / MS Channels
IS 2062
SS / MS Beams
IS 2062 — light, medium and standard
SS / MS Round Bars (wire rods)
Low carbon 5WR-14 / IS 2062 Gr. A
TMT Re-Bars
FE 415 / FE 500
Stainless Structural
304 / 304L, 316 / 316L angles, channels and flats on request
Types Available
- Angles
- Channels
- Beams
- Flats
- Square bars
- Round bars
- TMT bars
Dimension Chart
| Section | Available sizes (mm) |
|---|---|
| Angles | 25×25×3/5, 35×35×5, 40×40×5/6, 45×45×4/5/6, 50×50×5/6, 60×60×6/8, 65×65×6/8/10, 75×75×6/8/10, 80×80×6/8, 90×90×6/8/10, 100×100×6/8/10/12, 110×110×8/10/12, 130×130×10/12, 150×150×10/12/16/20, 200×200×16/20 |
| Channels | 75×40, 100×50, 125×65, 125×70, 150×75, 150×85, 175×75, 200×75, 200×100, 250×80, 250×125, 300×90, 350×100, 400×100 |
| Beams | 100×50, 125×70, 150×75, 175×85, 200×100, 250×125, 300×140, 350×140, 400×150, 450×150, 500×180, 600×210 |
| Flats | 21×6 mm to 300×16 mm |
| Square bars | 10×10 mm to 63×63 mm |
| Round bars | 5 mm to 250 mm dia. |
Dimensions are reference values from the governing standard. Please confirm the exact dimensions and tolerances against the current edition of the standard before ordering.
Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Ni | Mo | Other |
|---|---|---|---|---|---|---|---|---|---|
| Mild Steel IS 2062 Gr. A | ≤ 0.23 | ≤ 1.50 | ≤ 0.40 | ≤ 0.050 | ≤ 0.050 | — | — | — | — |
| SS 304 | ≤ 0.08 | ≤ 2.00 | ≤ 0.75 | ≤ 0.045 | ≤ 0.030 | 18.0–20.0 | 8.0–10.5 | — | — |
| SS 316L | ≤ 0.035 | ≤ 2.00 | ≤ 0.75 | ≤ 0.045 | ≤ 0.030 | 16.0–18.0 | 10.0–14.0 | 2.00–3.00 | — |
Values are the usual requirements of the governing ASTM/ASME specification and are given for reference. The mill test certificate supplied with your consignment is the governing document.
Mechanical Properties
| Grade | Tensile strength (MPa, min) | Yield strength (MPa, min) | Elongation (%, min) | Hardness |
|---|---|---|---|---|
| Mild Steel IS 2062 Gr. A | 410 | 250 | 23 | — |
| SS 304 | 515 | 205 | 35 | 201 HB max |
| SS 316L | 485 | 170 | 40 | 217 HB max |
Applications
Need Angle / Channel / Flat Bar for your project?
Send us the grade, size and quantity — our team replies with a quotation promptly.
