Sheets / Plates & Coils
Sheets, plates, coils, foils and strips in stainless steel, duplex, hi-nickel, titanium, aluminium, cupro nickel and boiler quality steel — 0.01 mm to 100 mm thick.
Product Overview
Our flat product range covers everything from 0.01 mm foil to 100 mm thick plate, in widths up to 2000 mm and lengths up to 8000 mm. Material is stocked in stainless steel, duplex and super duplex, hi-nickel alloys, titanium, aluminium, cupro nickel, Monel, spring steel and boiler quality grades.
Plates can be supplied cut to size, and sheets are available in a full choice of finishes — HR No.1, 2B, BA, Matt, PVC coated and chequered. We also specialise in the stainless steel series and in Hardox 400/500 wear plate.
- Sheet thickness: 0.8 mm to 4 mm
- Plate thickness: 5 mm to 100 mm
- Coil thickness: 0.1 mm to 12 mm
- Foil thickness: 0.01 mm to 0.3 mm
- Finish: HR No.1, 2B, BA, Matt, PVC coated, chequered
Specifications
| Parameter | Details |
|---|---|
| Sheets | 0.8 mm to 4 mm thick, 1000 mm to 2000 mm wide, 2000 mm to 6000 mm long |
| Plates | 5 mm to 100 mm thick, 1000 mm to 2000 mm wide, 2000 mm to 8000 mm long |
| Coils | 0.1 mm to 12 mm thick, 10 mm to 1500 mm wide |
| Foils | 0.01 mm to 0.3 mm thick, any width |
| Strips | 1 mm to 100 mm thick, 10 mm to 900 mm wide, 1000 mm to 6000 mm long |
| Finish | HR No.1, 2B, BA, Matt, Matt + 1 side PVC, BA + 1 side PVC, chequered |
| Specialising in | Stainless steel series, Hardox 400 / 500 |
Grades & Standards
Stainless Steel
ASTM A240 — 304 / 304L / 316 / 316L / 316Ti / 309 / 310 / 317 / 317L / 321 / 347 / 409 / 410 / 430 / 904L / SMO 254 / AL6XN
Duplex & Super Duplex
ASTM A240 — UNS S31803 / S32205 (2205), S32304 (2304 lean duplex), S32750 (2507), S32760 (Zeron 100)
Quenched & Tempered
ASTM A537 CL. 1 & 2
Boiler Quality / Wear Plate
SA 516 Gr. 70, Hardox 400 / 500
Nickel & Inconel
ASTM B162 N02200, N02201; ASTM B168 N06600, N06601, N06617; ASTM B670 N07718; ASTM B443 N06625
Incoloy
ASTM B409 N08800, N08810; ASTM B424 N08825; ASTM B462 N08020
Hastelloy
ASTM B575 N10276, N06022; ASTM B333 N10665
Titanium
ASTM B265 — Gr. 1, 2, 3, 4, 7, 11 (commercially pure); Gr. 5 (6Al-4V), Gr. 23 (6Al-4V-ELI), Gr. 12
Alloy Steel Plate
ASTM A387 Gr. 11, 12, 22, 5, 91 (CL 1 / 2)
Carbon Steel
ASTM A36, S275 JR, IS 2062 Gr. A / B
Aluminium
ASTM B928 — 5083 (A95083), 5086 (A95086), 5052 (A95052), 6061 (A96061)
Cupro Nickel
ASTM B171 — C70600 (90:10), C71500 (70:30)
Monel
ASTM B127 — N04400, DIN N05500
Spring Steel Coils
CR C55, C80, C62, C45
Types Available
- Sheets
- Plates
- Coils
- Foils
- Strips
- Chequered plates
- Cut to size
Dimension Chart
| Form | Thickness | Width | Length |
|---|---|---|---|
| Sheets | 0.8 mm – 4 mm | 1000 mm – 2000 mm | 2000 mm – 6000 mm |
| Plates | 5 mm – 100 mm | 1000 mm – 2000 mm | 2000 mm – 8000 mm |
| Coils | 0.1 mm – 12 mm | 10 mm – 1500 mm | Coil form |
| Foils | 0.01 mm – 0.3 mm | Any width | — |
| Strips | 1 mm – 100 mm | 10 mm – 900 mm | 1000 mm – 6000 mm |
Dimensions are reference values from the governing standard. Please confirm the exact dimensions and tolerances against the current edition of the standard before ordering.
Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Ni | Mo | Other |
|---|---|---|---|---|---|---|---|---|---|
| SS 304 | ≤ 0.08 | ≤ 2.00 | ≤ 0.75 | ≤ 0.045 | ≤ 0.030 | 18.0–20.0 | 8.0–10.5 | — | — |
| SS 316L | ≤ 0.035 | ≤ 2.00 | ≤ 0.75 | ≤ 0.045 | ≤ 0.030 | 16.0–18.0 | 10.0–14.0 | 2.00–3.00 | — |
| SS 904L | ≤ 0.020 | ≤ 2.00 | ≤ 1.00 | ≤ 0.045 | ≤ 0.035 | 19.0–23.0 | 23.0–28.0 | 4.00–5.00 | Cu 1.00–2.00 |
| Duplex 2205 (S31803 / S32205) | ≤ 0.030 | ≤ 2.00 | ≤ 1.00 | ≤ 0.030 | ≤ 0.020 | 21.0–23.0 | 4.5–6.5 | 2.5–3.5 | N 0.08–0.20 |
| Aluminium 5083 | — | 0.40–1.00 | ≤ 0.40 | — | — | 0.05–0.25 | — | — | Mg 4.0–4.9, Al balance |
| Aluminium 6061 | — | ≤ 0.15 | 0.40–0.80 | — | — | 0.04–0.35 | — | — | Mg 0.8–1.2, Cu 0.15–0.40, Al balance |
Values are the usual requirements of the governing ASTM/ASME specification and are given for reference. The mill test certificate supplied with your consignment is the governing document.
Mechanical Properties
| Grade | Tensile strength (MPa, min) | Yield strength (MPa, min) | Elongation (%, min) | Hardness |
|---|---|---|---|---|
| SS 304 | 515 | 205 | 35 | 201 HB max |
| SS 316L | 485 | 170 | 40 | 217 HB max |
| SS 904L | 490 | 215 | 35 | — |
| Duplex 2205 | 620 | 450 | 25 | 293 HB max |
| Aluminium 5083-H111 | 275 | 125 | 12 | — |
| Aluminium 6061-T6 | 290 | 240 | 8 | 95 HB |
Applications
Need Sheets / Plates & Coils for your project?
Send us the grade, size and quantity — our team replies with a quotation promptly.
